// ST7796 222 x 480 display with no chip select line
#define USER_SETUP_ID 213

#define ST7796_DRIVER     // Configure all registers

#define TFT_WIDTH  222
#define TFT_HEIGHT 480

#define CGRAM_OFFSET      // Library will add offsets required

// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red

#define TFT_INVERSION_ON

#define TFT_MISO  -1
#define TFT_MOSI  14
#define TFT_SCLK  15
#define TFT_CS    25
#define TFT_DC    13
#define TFT_RST   2
#define TFT_BL    4
#define TFT_BACKLIGHT_ON    HIGH


#define LOAD_GLCD  // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT
#define SPI_FREQUENCY  40000000