#define USER_SETUP_ID 162

#define ST7796_DRIVER



#define MHS_DISPLAY_TYPE

//#define RP2040_PIO_SPI

#define TFT_MISO 16

#define TFT_MOSI 19

#define TFT_SCLK 18

#define TFT_CS   17  // Chip select control pin

#define TFT_DC   20  // Data Command control pin

#define TFT_RST  21  // Reset pin (could connect to Arduino RESET pin)

//#define TFT_BL     // LED back-light



#define TOUCH_CS 22     // Chip select pin (T_CS) of touch screen



#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH

#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters

#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters

#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm

#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.

#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.

//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT

#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts



#define SMOOTH_FONT



#define SPI_FREQUENCY  125000000

#define SPI_READ_FREQUENCY  20000000

#define SPI_TOUCH_FREQUENCY  2500000