// Setup for the ESP32 S3 with GC9A01 display

#define USER_SETUP_ID 70



#define GC9A01_DRIVER



#define TFT_WIDTH  240

#define TFT_HEIGHT 240

                    // Typical board default pins - change to match your board

#define TFT_CS   10 //34 //     10 or 34 (FSPI CS0) 

#define TFT_MOSI 11 //35 //     11 or 35 (FSPI D)

#define TFT_SCLK 12 //36 //     12 or 36 (FSPI CLK)

#define TFT_MISO 13 //37 //     13 or 37 (FSPI Q)



// Use pins in range 0-31

#define TFT_DC    7

#define TFT_RST   6



#define LOAD_GLCD

#define LOAD_FONT2

#define LOAD_FONT4

#define LOAD_FONT6

#define LOAD_FONT7

#define LOAD_FONT8

#define LOAD_GFXFF



#define SMOOTH_FONT



// FSPI port (SPI2) used unless following defined

#define USE_HSPI_PORT



#define SPI_FREQUENCY  80000000   // Maximum for ILI9341